The MC4 connector consists of a plug and socket design.
The plugs and sockets are placed inside plastic shells, the plug is inside a cylindrical shell that looks like a female connector but is referred to as male, and the socket is inside a square probe that looks male but is electrically female.
The female connector has two plastic fingers that have to be pressed toward the central probe slightly to insert into holes in the front of the male connector. When the two are pushed together, the fingers slide down the holes until they reach a notch cut into the side of the male connector, where they pop outward to lock the two together.
For a proper seal, MC4 require the usage of a cable with the correct diameter.
Normally double-insulated (insulation plus black sheath) and UV resistant (most cables deteriorate if used outdoors without protection from sunlight).
Connection is made by use of a special crimping tool, alternatively by soldering.
The MC4 connector is UL rated at 30 A and 600 V maximum, depending on the conductor size used.
Standards efforts in Europe also allow 1000 V versions.
This MC4 Splitter upgrade waterproof degree to IP67
Special design for stronger two plug pins on male connectors,it will not easy disconnect without mc4 disconnect tool
This MC4 Splitter body made by professional photovoltaic plastic material for anti-aging and resistance to ultraviolet radiation
This MC4 metal pins 100% use tined copper,it will more Safety and more durable
This MC4 Splitter with TUV certification and reach 25 years outdoor service life standard