• Voltage: DC 12V/24V
• Self-consuming: 10MA
• Rated Charge Current: 20A
• Rated Load Current: 20A
• Over charge Protection: 14.4V/28.8V
• Over charge Floating charge: 13.7V/27.4V
• Over discharge Protection: 10.7V/21.4V
• Over discharge Recover: 12.6V/25.2V
• USB output: 5V/3A
• Operating temperature: -35?-60?
• Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in
1.make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize lose.
3.The regulation is only suitable for lead add batteries: OPEN, AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator only suitable for regulating solar modules, Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Battery Voltage: 12V/24V auto & Charge Current: 20A & Discharge Current: 20A
Automatically manage the working of solar panel and battery in solar system. Use PWM mode, improve system efficiency and prolong the life span of the battery.
Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
Big LCD display, all adjustable parameter. Good heat dissipation
Easy to set up and operate, have a User's Manual, suitable for home, industrial, commercial etc.