MOHOO 30A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port PWM LCD Display 12V/24V

Price: $34.19 $23.98
Product prices and availability are accurate as of 2018-04-24 10:05:12 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $10.21 (30%)
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Charger Controller Model:BLS-30A
Size:
(1)Charge Controller Dimensions: 168 * 42 * 92mm
(2)Charge Controller Weight:320g
Charge Regulator Function:
1.Large LCD display
2.Support light control and time control
3.Dual USB 5V 3A output?5V/1.5A each?
4.System voltage 12V/24V automatic identification
5.Intelligent PWM charging mode
6.Battery reverse discharge protection
7.Battery overvoltage protection
8.Battery undervoltage protection
9.Dual bottom design, easy to setup
Charger Controller Specification:
(1)Rated charging current:30A
(2)Rated load current:30A
(3)Working voltage:12V/24V auto
(4)Float charging voltage:13.8V/27.6V?Adjustable?
(5)Undervoltage protection:10.7V/21.4V (Adjustable)
(6)Over voltage protection:16.5V/33V
(7)Low voltage recovery:12.6V/25.2V (Adjustable)
(8)Solar panel charger controller voltage:?50V
(9)Boost voltage:14.4V/28.8V
(10)USB Output:5V/1.5A each
(11)No-load loss?10mA
(12)Waterproof?IP32
(13)Short circuit or overload (1.25 times rated current in 60 second or short circuit): battery icon flashes, regularly try to restore automatically
(14)Charge Mode: 3 kinds of charge control (directly charge, boost charge, floating charge)
(15)Temperature Compensation: -4mV/Cell/°C
(16)Installation line number: ?5# AWG(6mm2)
(17)Operating temperature -35 ? -60 ?
(18)Storage temperature -40 ? -70 ?

Product Features

?This Charge controller is for 12V/24V. When installing for the first time, please make sure the battery has sufficient voltage so that the Charger controller can recognize the normal battery type.Install the Charger controller to the battery as close as possible to avoid voltage dropping caused by over long wires and affect normal voltage judgment. ?Caution:Charge Controller should connect the battery first,and then connect the solar panel,and finally the load!The disassembly sequence is contrary to the wiring order. ?Charge controller is only applicable to various lead-acid batteries.Do not use other batteries (including lithium batteries, nickel-metal hydride batteries, etc.). ?Charge controller can only use the photovoltaic panel as a charging source. Do not use a DC or other power source as a charging source. ?Charge controller will heat up when it is running. Please be careful to install the Charger controller on a flat, well-ventilated place.

Write a Review