Lensun Special 100W 12V Black Fiberglass Flexible Solar Panel Kit

Price: from $319.00

Please choose from the options above to see price and availability.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Package Includes:
1x 100W Mono flexible solar panel
1x 10A solar charge regulator

NOTE: Please do not reverse bending flexible solar panel when you receive it and install it. Or the solar cells maybe damaged for stress concentration on the cells, and solar panel's output current will reduce.

Electrical Information of 100W 12V Black Fiberglass Mono Flexible Solar Panel (Sunpower Solar Cells):
Peak power: 100W
Solar cell efficiency: 19%
Maximum power voltage: 17V
Maximum power current: 5.88A
Open circuit voltage: 20.06V
Short circuit current: 6.47A
Power allowance range: +/-3%
Maximum system voltage: 500V
Values at standard test conditions: Air Mass - AM1.5, Irradiance - 1000W/m2, Cell Temperature - 25¡ãC
Material Information:
Laminated for weather resistance
Laminated with fiberglass + ETFE + Silicon cell + EVA + Tedlar
Solar cells: Monocrystalline
Dimensions: 1273 x 560 x 2.5mm
Net Weight: 2.71kg
Back sheet: Fiberglass
J-Box: IP 65 rated


Specification of 10A 12V/24V MPPT solar charge Controller:
Model No: Tracer-1210RN
Nominal System Voltage: 12VDC | 24VDC Auto work
Rated Battery Current: 10A
Maximum Battery Voltage: 32V
Max. Solar Input Voltage: 100VDC
Max. PV input power: 12V/ 130W 24V /260W
Self-consumption: <10mA(24V)
Charge Circuit Voltage Drop: ¡Ü0.26V
Discharge Circuit Voltage Drop: ¡Ü0.15V
Communication: TTL232 / 8pin RJ45
Working temperature: -35 to +55 C
Storage temperature: -35 to +80 C
Humidity: 10%-90% NC
Dimension: 156 x 97 x 68 / mm
Mounting holes: 147 x 60 / mm
Mounting hole size: ?5
Terminal: 4mm2
Weight: 0.55kg
Enclosure: IP30

Product Features

Made with Grade A Back Contact Mono cells, up to 23% high output efficiency. It has the smallest size of all solar panels with the same wattage commercially available on the market today. The panel uses a more expensive material (imported from Japan) called ETFE (Ethylene Tetrafluoroethylene) versus PET (Polyethylene terephthalate). The ETFE film layer absorbs light better with less reflection leading to more power per square inch. Made of Fiberglass back sheet. The ETFE material bonded with the fiberglass back sheet makes a stronger panel than a cheaper PET film one with less chance of cracking or water intrusion. Highly stain-resistant and easily gets cleaned by the rain. Highly resistant to seawater corrosion. Auto Switch charge, Mutiple electric protection: over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.

Write a Review