30A/50A MPPT Solar Charge Controller, Solar Panel Battery Intelligent Regulator with Dual USB Port and LCD Display 12V/24V

Price:
Product prices and availability are accurate as of 2018-12-10 18:38:47 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Features:
--PROTECTION FUNCTION: Built-in over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection improves system efficiency and battery life. 
--STORAGE FUNCTION: The solar charge controller helps you record the total run time of system, timers of error during running time, times of full charged battery, which offers reliable working storage.

Specifications:
Current: 30A, 50A (optional)
Rated Voltage: 12/24V
USB Output: 2.4A *2
Over Charge Current(V): 13.7V/*2 24V
Over Discharge Current(V): 10.5-11V/*2 24V
Temperature Compensation: -3mv/?/cell
Empty Load Wastage: <45mA
Loop Voltage Drop: <200mv
Display: LCD Display
Charging Type: MPPT
Waterproof Grade: IP32
Material: Plastic
Color: Black + Orange
Size: 17.5 * 14 * 4cm/6.9 * 5.5 * 1.6in(30A), 21 * 19.2 * 5.5cm/8.3 * 7.6 * 2.2in(5A)
Package Weight: 480g-868g

Package List:
1 * Solar Charge Controller
1 * User Manual

Notes:
1. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.
2. 12.6V is the recovery discharge voltage.
3. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.
If you have trouble in use, try adjusting the float voltage to 13.7V:
First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.
Second, you must press the add button on the screen until the voltage reaches 13.7V.
Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.

Product Features

--PROTECTION FUNCTION: Built-in over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection improves system efficiency and battery life. --AUTOMATIC SYSTEM: It will automatically identify system voltage and correct the charging and discharging voltage for longer battery lifetime. MPPT 3-stage charging mode allows you choose load control mode, and timer function can also be reset for street light at night. --STORAGE FUNCTION: The solar charge controller helps you record the total run time of system, timers of error during running time, times of full charged battery, which offers reliable working storage. --LCD DISPLAY: Humanized LCD displaying and double button operation is available to setup and modify completed technical data. Adopting negative MOSFET in series control circuit, roundly reverse connected protection makes solar panels, battery, and charge controller all connected together. --GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails as soon

Write a Review